Need a couple out of ordinary tools LARGE allen head wrench or allen socket to remove the brake caliper unit out of the way to access rotor(s). And you will need the socket to remove the large nut in the center of the rotor.. This nut is huge around 28mm to 32mm.. Going to have to find out the size and get one of these sockets very large only come on 3/4" socket sets so may need a ratchet adapter to fit smaller 1/2" ratchet to get by.. Unless you have the 18" inch long 3/4" ratchet!! One thing may keep in mind can save hours time and skip removing the brake line to the calipers then to have to bleed the entire brake line afterwards, what a project of it's own.. Can simply hang the entire brake caliper unit with the pads when you get the two allen head bolts out the back of it off and slide the caliper up over the rotor. Can hang them in that area with a wire coat hanger or some kind of wire / string to save unnecessary work. Good luck.
