Take tire off or tires if you have jack stands, remember safety first.
If you don't have caliper press, with a flat head screw driiver or a pry bar
before you loose any bolts return the calipers, turn the weel to the side the
you working on, stick the bar between the disc and brake pads...pres slowly
til the caliper is all the way in.
Then loose the two runner bolts normaly is a 10mm or 3/8 allen wrench
ones there are out just pull the caliper out... Make sure you grease the
runners.
Install new pads and hardware and put it together about 15-25ft of torke.
If you don't have caliper press, with a flat head screw driiver or a pry bar
before you loose any bolts return the calipers, turn the weel to the side the
you working on, stick the bar between the disc and brake pads...pres slowly
til the caliper is all the way in.
Then loose the two runner bolts normaly is a 10mm or 3/8 allen wrench
ones there are out just pull the caliper out... Make sure you grease the
runners.
Install new pads and hardware and put it together about 15-25ft of torke.