Anonymous

Where Do The Timing Marks Need To Be Set On A Mazda Mpv 1993 3.0 Engine?

3

3 Answers

Anonymous Profile
Anonymous answered
Ignition Timing Trans. Min.
Set
(Degrees) Max.
Set
(Degrees) Auto
Trans.
Gear Footnote
AT+MT 10 12 P 81
Note 81: Ground test connector (green connector, single wire).
Anonymous Profile
Anonymous answered
How do I set  the timing on a 1993 mazda MVP 4x4 my timing belt busted & now I can't get it to tern on I put a new belt on it now what do I need to do?
thanked the writer.
Kal Valgma
Kal Valgma commented
Hey,sorry to hear the problem,but first of you need to set all the timing points to the right mark and the put the belt on.
1.left cam wheel has a small marking on the inside,try it with your finger you'll feel it.set that up with a little triangle mark on the engine block on the left side.
2.do the same with right side,triangle mark on right side engine ,you'll see when you look @ the engine from font.
3.and the bottom pully has a small mark on front (triangle) set that straight-up.
Kal Valgma Profile
Kal Valgma answered
 
Hey,sorry to hear the problem,but first of you need to set all the timing points to the right mark and the put the belt on.
1.left cam wheel has a small marking on the inside,try it with your finger you'll feel it.set that up with a little triangle mark on the engine block on the left side.(black plastic wheel)
2.do the same with right side,triangle mark on right side engine ,you'll see when you look @ the engine from font.
3.and the bottom pully has a small mark on front (triangle) set that straight-up match the mark on the engine.
4.put the belt on and the belt covers.
5.set pully back on it and make sure that the pulley notch matches with the mark on the cover "T"
6.put everything back together and enjoy your ride.
 

Answer Question

Anonymous