Anonymous

How Do I Know If Transmission Fluid Is Low On 2003 Ford Explorer?

1

1 Answers

Anonymous Profile
Anonymous answered
1.- run your truck for about 10 min in idle or you can checked after you came back from the store.
2.- take your transmission fluid dipstick out marked as trans fluid or mercon V.
3.- with a clean white napkin clean the dipstick and insert the stick back in, oil should look red in napkin..
4.- pull it out and check the fluid mark ( two holes about an inch away from each other and a crossed marked above them) when the fluid is low you ill see your oil below the hole closest to the crossed marked.
5.- put oil until reach crossed marked. !!important !! Do not pass the cross marked or your truck will stall.

Notice:
If you know that it has been a long time since the truck had had tranny fluid change  or probably you baught the truck and don't know when they did it, I'll recommended have a transmission service done.

Answer Question

Anonymous